PostRequest.io

Separation & Filtration suppliers for food & beverage makers

Snack and fried food makers buy fryer oil filtration; juice, puree and dairy processors buy clarifiers, separators and membranes; many plants filter process water. Beverage makers buy product filtration.

31 suppliers are listed under Separation & Filtration in the PostRequest directory.

Separation and filtration equipment splits a stream by particle size, density, or molecular weight: disc-stack centrifuges and decanters, membrane systems from microfiltration through reverse osmosis, plate-and-frame and pressure-leaf filters, cross-flow units, and bag and cartridge housings for polishing. Plants shop this category to raise yield, clarify a product, concentrate before drying, recover a valuable fraction, or protect a downstream membrane. The economics hinge on flux decay, cleaning frequency, and how much product is lost to the reject stream, so a low equipment price can hide a high operating cost. Ask each supplier for a mass balance, not just a machine.

Many of today's listings came from a brewing-industry directory, so beverage suppliers are overrepresented. For food ingredients, packaging and co-packing, our agents also search beyond the directory.

Start a request for Separation & Filtration

Suppliers listed under Separation & Filtration

Start a request and our agents will ask the suppliers that fit to quote. Your name and company stay private until you choose to connect.

What to include in your request

  • Feed stream: flow rate, temperature, solids type and concentration, particle size distribution, and viscosity
  • Separation goal: target clarity or turbidity, concentration factor, or a specific rejection and permeate spec
  • Product value and the acceptable loss to reject, retentate, or filter cake
  • Cleaning regime, chemistries, and temperatures the membranes or contact parts must tolerate
  • 3-A conformance for separators, clarifiers, and product-contact housings in dairy or liquid-food duty
  • Batch or continuous operation, expected run time between cleans, and available floor space
  • Utilities: power, CIP supply, compressed air, and drain for backwash or desludge

Lead time

Lead time depends on the technology and scale: a cartridge housing is quick, while a large disc-stack separator or a multi-skid membrane plant with custom elements runs much longer. Sanitary certification and exotic alloys add time.

What drives the quote

  • Technology type and hydraulic capacity
  • Membrane area and element chemistry, or bowl size and the desludge mechanism
  • Contact-part metallurgy and sanitary certification
  • Automation: flux control, automatic desludge, CIP integration, and instrumentation
  • Number of stages or skids and the degree of concentration required

Common spec mistakes

  • Sizing on clean-water flux and ignoring the real flux decay the actual feed causes
  • Underestimating cleaning frequency, so the line cannot hit daily volume once fouling is real
  • Overlooking product loss in the reject stream when comparing a cheap unit to a better-yielding one
  • Feeding a membrane without adequate prefiltration, which shortens element life dramatically
  • Not stating feed-solids variability, so the machine chokes on the worst incoming batch

How to compare Separation & Filtration quotes

Quotes rarely arrive in the same shape. Before you compare prices, line them up on the same terms:

  • Same unit. Per piece, per case, per pound or per system, at the same quantity.
  • Same scope. What's included: freight, installation, tooling or plates, documentation, spare parts, training.
  • Minimums. The smallest order each supplier will take, and whether the price changes above it.
  • Lead time from when. From purchase order, from deposit, or from artwork or drawing approval.
  • Terms. Deposit, payment terms, and how long the price is held.
  • Documents. Spec sheet, certificate of analysis, letter of guarantee or food-contact statement, where they apply.

Our comparison lines these up for you. Where a supplier leaves something out, we say so instead of guessing.

Related

Frequently asked questions

How do I get quotes for Separation & Filtration?
Start a request and describe what you need once. Our agents shortlist Separation & Filtration suppliers that list it, email each one your request from a PostRequest address, follow up once, and line up price, minimums, lead time and terms side by side. No account or password needed.
Are the suppliers on this page vetted?
They're directory listings from public sources, not endorsements. Before our agents send your Separation & Filtration request, they check that each supplier actually offers what you need. During early access, a person on our team reviews every comparison before it reaches you.
Can I include suppliers I already use?
Yes. Add them and we'll request quotes from them alongside new options, so you see how they compare.
Do suppliers see who I am?
No. When our agents send your Separation & Filtration request, suppliers see the spec and roughly where it ships. Your name, company and contact details go to a supplier only after you choose to connect.
What does it cost?
Free during early access. No card needed.

Let our agents get you comparable quotes

Tell us what you need in Separation & Filtration. Our agents shortlist suppliers, email them your request, and aim to bring back 3 comparable quotes side by side. Free during early access. No card needed.

Start a request